M & T Manufacturing Logo

For: Karmann Ghia Convertible Wood Top Bows
Description:
Front header Wood Bow, Ghia Convertibles 1957-1969

In order to get original mechanism to fit, this bow may require slight supplemental grinding. We do a nearly full hollowing of the bow. We do not stock plastic versions as they do not tack properly.

Questions? Talk to us!
$285.95

Part #: GE bow
We have been manufacturing convertible wood top bows in our shop since 1974. You will be purchasing these wood products directly from the manufacturer. We will work with you on any installation issues, such as applying your wood to non-original imported mounting plates that you have to install to your framework.

Wood top bows are tacking forms which are embedded in the top frame. In the early Ghias there was a wood bow below the rear plastic window which is attached on the shelf of the car. This was eliminated with the introduction of the rear attachment cable in 1968.

We recommend that you not use cheap plastic top bows, also called "wood replacement bows." They have a tendency to chip and even crack upon being stapled; these "wood replacement bows" do not hold staples well. They are very inferior to the real wood bows.

The full restoration of a Karmann Ghia convertible top (the top itself) begins with the Ghia convertible top frame. Once the top frame is sanded
and lubricated to restore it to proper functioning, the convertible top frame parts must be addressed. The wood top bows will provide, by far, the best staple holding and retention, much superior to the varathane used in Ghia wood replacement bows. In order to keep the top bows functional in top after top, you can treat the wood as you would any exterior wooden product, either with penetrating oils or with exterior paint.

Email questions to: support@mtmfg.com
Call us at: 1-800-999-2892
Copyright © 2019 M&T Manufacturing, 30 Hopkins Lane, South Kingstown, RI 02879
Like us on facebook at http://www.facebook.com/mtmfg.ctg.cug