Volkswagen Beetle Tools

« Back to Volkswagen Beetle Catalog
Have a question? Talk to us!

Installation Supplies

Installation Supplies

Seat Cover Tool Kit: Hog Rings and Pliers

These hog rings and pliers make installing seat covers a cinch. Recommended for all Volkswagen vehicles.

VW Beetle
Part #: 43-4410



Cap, Boot Snap
VW Beetle
Part #: VL-10138
Socket, Boot Snap
VW Beetle
Part #: VL-10224



Battery Kill Switch
A convenient addition to cut out battery from system.

All VW Beetle and Super Beetle
All Karmann Ghia
All VW Bus
All VW Thing
All VW Type 3
VW Beetle



Distributor Drive Gear Puller Or Installer For Vw Air-cooled Engine Easily Installs Or Removes Distributor Drive Gears Quality Tool For Any Vw Mechanic A Must For Any Engine Builder
VW Beetle
Part #: 5717
Case Splitting Tool

After you remove the oil pump, install this handy device into the pump opening up against the cam gear. (Make sure it doesn't touch the gear.) Adjust the bolts and you'll see the tool move outward. This puts pressure from the inside out and pushes the case halves apart. Now, that sure beats hammering on the engine case to split it apart.

Works on VW Bug, Bus, Ghia, and Thing.

VW Beetle
Part #: 16-9601
Flywheel Lock

Our universal flywheel lock has been designed for use on all air-cooled VW and Porsche motors. This tool is a must for disassembling an engine or replacing a leaky flywheel seal.

VW Beetle
Part #: 5003
Heavy Duty Scissor Jack, Maximum 1 Ton
VW Beetle
Part #: 98-0109-B
OEM Style 7 Piece Tool Kit with Bag

This all-in-one tool kit includes the following:

  • Bag
  • 19/21mm Hex Wrench (Spark Plug/Lug)
  • 10/13mm wrench
  • Pliers Tommy Bar
  • Reversable Screwdriver
  • Hub Cap Tool
  • Recommended for Bug, Bus, Ghia, Thing

VW Beetle
Part #: 111-012-023
Ring Compressor

This unique tool compresses the rings with the use of your own pliers -- allowing the cylinders to be slipped over the piston. Designed for use on VW and Porsche engines with 83-87mm pistons.

Fits Bug, Bus, Ghia, Thing

VW Beetle
Part #: 5764
Vintage-style Spare Tire Tool Box with Tools.
Fits Inside All Stock 5-Bolt Wheels.
Faithful Reproduction of Original Tool Kit.
VW Beetle
Part #: 15-2016
Bench Mount Head Assembly Tool
VW Beetle
Part #: 5742
Crankshaft Gear Puller - A professional quality tool will solve the problem of removing the crankshaft timing gear- a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation this tool simply slips under the gear and with a wrench or impact gun the gear is easily removed. The highest quality standards are used in the construction of this tool for years of service for the do-it-yourself or the professional. Fits all 12-1600cc Beetle style engines- does not fit the larger 17-2000cc type 4 engines. Note DO NOT FORGET to remove the snap ring on the end of the crankshaft before using this puller as this is a sure way to ruin this gear puller and void your warranty.
VW Beetle
Part #: 5714
Deluxe Flywheel Main Seal Tool For Vw Bug / Vw Beetle 1600CC Based Air-cooled Engines. Provides Proper And Even Pressure On The Flywheel Main Seal During Install.
VW Beetle
Part #: 5774
Heavy Duty Collapsible Roll A Way Engine Stand Tool For Vw Bug / Vw Beetle 1600CC Air Cooled Engines. Bolts To One Half Of The Engine Case Allowing Full Access Around Complete Fully Dressed Vw Air Cooled Engines. By Bolting To One Half Of The Engine Case This Makes It Possible To Tear Your Engine All The Way Down To Splitting The Case Halfs.
VW Beetle
Part #: 5007-E
Helping Hand Gland Nut And Axle Nut Assist Tool For Classic Vw Bug / Volkswagen Beetle. Helps Tighten Or Loosen Hi-Torqued Volkswagen Bug Axle Nuts And Gland Nuts By Holding The Brake Drum Or Flywheel Steady. Works With 6 Volt And 12 Volt Flywheels. Works With Vw 4 X 130mm Lug Bolt Pattern And Vw 5 X 205mm Lug Bolt Pattern Brake Drums/Rotors.
VW Beetle
Part #: 5750
VW Beetle
Part #: 5747
Jack Plate - 1950-79 Type 1 Volkswagen Beetle - Slides into the stock jack support Allows for a safe and convenient jacking point Allows for other style jacks to be used including rolling floor jacks
VW Beetle
Part #: 18-1064
VW Crank & Flywheel Jig 8 Pin Positioning Tool mounts to the flywheel or crankshaft and aligns them for drilling 4 additional dowel pin holes. The jig includes hardware to mount to either the crank or the flywheel to ensure a proper pattern is drilled. The jig can be used on all 200mm flywheels and 1300cc and larger Type 1 based cranks.
VW Beetle
Part #: 5004
VW Valve Guide Installer Tool. The Pilot On This Tool Holds The Valve Guide In The Correct Location While It Is Pressed Into The Cylinder Head.
VW Beetle
Part #: 5763

Printer friendly

Continue Shopping
Classic Volkswagen Beetle parts for the following years: 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978 and 1979