Volkswagen Bus, Vanagon, Eurovan Air Cooling

Fits original small style pulley tin.
Does not have intake manifold heat riser cutouts.
With original intake manifold with heat riser pipes
openings must be cut in this tin.

For 1600 cc engines.

For all 1300-1600cc VW engines.  

Fit below the cylinder heads and push rod tubes.  Channels the hot air
from the fan shroud to under the car and out back. Also protects push
rod tubes from debris.





 

1966-1979 VW Beetle & VW Super Beetle
1960-71 VW Bus
1973-1974 VW Thing
1960-74 Karmann Ghia

Note: These plates are usually missing. They
should be installed for best engine cooling.
Fits under cylinder heads to deflect heat.
Will fit 66-67 models but do not have the original hose holes.

Installed between push rod tubes and cylinders
air is forced directly to the cylinder
enabling best running temperature.

For 1300-1600 cc engines.

VW Beetle & VW Super Beetle 1965-79
VW Bus 1963-71
VW Karmann Ghia 1965-1974
VW Thing 1973-74

This is the heat deflector on the front
left side of the engine. The bottom piece is sold separately.
Highly recommended to cool your engine temp.
Note that there are three pieces required.

VW Beetle & VW Super Beetle 1966-79
VW Karmann Ghia 1966-74
VW Bus 1963-71
VW Thing 1973-74

The cylinder defector tin goes between two cylinders. Directs
air in between the cylinder cooling fins. Installed above the pushrod tubes
and must be installed before the push rod tubes. Sold each.

VW Beetle & VW Super Beetle 1966-79
VW Karmann Ghia 1963-74
VW Bus 1963-71

Forces air directly at cylinder enabling best running temperatures.

VW Beetle and VW Super Beetle 56-79
VW Karmann Ghia 56-74
VW Bus 56-71
VW Thing 73-74

VW Beetle 1971-79
VW Bus 1971
VW Karmann Ghia 1971-74
VW Thing 1973-74

VW Beetle and VW Super Beetle 73-79
VW Karmann Ghia 71-74
VW Bus 68-71

VW Beetle 1971-74
VW Bus 1960-71
VW Thing 1973-74
VW Karmann Ghia 1961-74

This plate is located behind the lower crank pulley

VW Beetle & VW Super Beetle 1961-79
VW Karmann Ghia 1961-74
VW Bus 1961-71