Volkswagen Beetle AIR COOLING ENGINE TIN, FANS, etc.

VW Beetle & VW Super Beetle 1975-79

1963.5-1974 Beetle,
1963.5-1974 Karmann Ghia
1963-71 VW Bus

1966-1979 VW Beetle & VW Super Beetle
1963-1971 VW Bus
1963-1974 Karmann Ghia
1973-1974 VW Thing

Set of four new steel mounting tabs. Perfect for
replacing stock tabs broken off heater boxes or
custom fabricating your own, when heater boxes
have been eliminated.

For all 1300-1600cc VW engines with heater boxes.

Directs the air coming from between the heads and cylinders
towards the back of engine.

VW Beetle & VW Super Beetle 1966-79
VW Karmann Ghia 1963-74
VW Bus 1963-71

Forces air directly at cylinder enabling best running temperatures.

VW Beetle & VW Super Beetle 1965-79
VW Karmann Ghia 1965-74
VW Bus 1963-71
VW Thing 1973-74

This is the heat deflector on the front
right side of the engine. The bottom piece is sold separately.
Highly recommended to cool your engine temp.
Note that there are three pieces required.

VW Beetle & VW Super Beetle 1965-79
VW Bus 1963-71
VW Karmann Ghia 1965-74
VW Thing 1973-74

Installed between push rod tubes and cylinders
air is forced directly to the cylinder
enabling best running temperature.

VW Beetle & VW Super Beetle 1966-79
VW Bus 1963-71
VW Karmann Ghia 1973-74
VW Thing 1973-74

The cylinder defector tin goes between two cylinders. Directs
air in between the cylinder cooling fins. Installed above the pushrod tubes
and must be installed before the push rod tubes.Sold Each.

Fits original small style pulley tin.
Does not have intake manifold heat riser cutouts.
With original intake manifold with heat riser pipes

For 1600 cc engines.

VW Beetle 1968-74
VW Bus 1968-71
VW Karmann Ghia 1968-74

This often missing piece of tin, routes hot air
that has exited the 1/2 side, up to the air filter
via the cardboard hose. Essential to prevent icing!

Fits original small style pulley tin.

This doghouse-style fan shroud replaced the upright version
for cars after 1971. This newer design was more effective
in treating bigger 1600cc engines.
The fan pulls in air while the shroud creates
a channeling effect to disperse it towards the Oil Cooler.

VW Beetle 1971-79
VW Bus 1971
VW Karmann Ghia 1971-74
VW Thing 1973-74

VW Beetle & VW Super Beetle 1967-79
VW Bus 1966-68
VW Karmann Ghia 1967-74
VW Thing 1973-74

VW Beetle and VW Super Beetle 1971-79
VW Bus 1971
VW Thing 1973-74
VW Karmann Ghia 1971-74

Installs on base of doghouse oil cooler.

VW Beetle and VW Super Beetle 1968-79
VW Karmann Ghia 1971-74
VW Bus 1968-71

This plate is located behind the lower crank pulley

VW Beetle & VW Super Beetle 1961-79
VW Karmann Ghia 1961-74
VW Bus 1961-71

Pull Motor & Replace: Clutch, Release Bearing, Crank Seal, Rear Mounts & Clutch Cable