Volkswagen Bus, Vanagon, Eurovan Tools

« Back to Volkswagen Bus, Vanagon, Eurovan Catalog
Have a question? Talk to us!

Installation Supplies

Installation Supplies

Arrow Fastener PT50 Pneumatic Staple Gun

 

VW Bus/Vanagon
Choose a color
$49.95
Part #: PT-50
Seat Cover Tool Kit: Hog Rings and Pliers

These hog rings and pliers make installing seat covers a cinch. Recommended for all Volkswagen vehicles.

VW Bus/Vanagon
Choose a color
$18.95
Part #: 43-4410


General

General

Distributor Drive Gear Puller Or Installer For Vw Air-cooled Engine Easily Installs Or Removes Distributor Drive Gears Quality Tool For Any Vw Mechanic A Must For Any Engine Builder
VW Bus/Vanagon
Choose a color
$38.95
Part #: 5717
Case Splitting Tool

After you remove the oil pump, install this handy device into the pump opening up against the cam gear. (Make sure it doesn't touch the gear.) Adjust the bolts and you'll see the tool move outward. This puts pressure from the inside out and pushes the case halves apart. Now, that sure beats hammering on the engine case to split it apart.

Works on VW Bug, Bus, Ghia, and Thing.

VW Bus/Vanagon
Choose a color
$10.95
Part #: 16-9601
Flywheel Lock

Our universal flywheel lock has been designed for use on all air-cooled VW and Porsche motors. This tool is a must for disassembling an engine or replacing a leaky flywheel seal.

VW Bus/Vanagon
Choose a color
$6.95
Part #: 5003
Heavy Duty Scissor Jack, Maximum 1 Ton
VW Bus/Vanagon
Choose a color
$51.95
Part #: 98-0109-B
Bench Mount Head Assembly Tool
VW Bus/Vanagon
Choose a color
$54.95
Part #: 5742
Crankshaft Gear Puller - A professional quality tool will solve the problem of removing the crankshaft timing gear- a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation this tool simply slips under the gear and with a wrench or impact gun the gear is easily removed. The highest quality standards are used in the construction of this tool for years of service for the do-it-yourself or the professional. Fits all 12-1600cc Beetle style engines- does not fit the larger 17-2000cc type 4 engines. Note DO NOT FORGET to remove the snap ring on the end of the crankshaft before using this puller as this is a sure way to ruin this gear puller and void your warranty.
VW Bus/Vanagon
Choose a color
$119.95
Part #: 5714
Deluxe Flywheel Main Seal Tool For Vw Bug / Vw Beetle 1600CC Based Air-cooled Engines. Provides Proper And Even Pressure On The Flywheel Main Seal During Install.
VW Bus/Vanagon
Choose a color
$32.95
Part #: 5774
Heavy Duty Collapsible Roll A Way Engine Stand Tool For Vw Bug / Vw Beetle 1600CC Air Cooled Engines. Bolts To One Half Of The Engine Case Allowing Full Access Around Complete Fully Dressed Vw Air Cooled Engines. By Bolting To One Half Of The Engine Case This Makes It Possible To Tear Your Engine All The Way Down To Splitting The Case Halfs.
VW Bus/Vanagon
Choose a color
$129.95
Part #: 5007-E
Heavy Duty Floor Dolly Features Heavy Gauge Steel For Strength And 4 Industrial Swivel Casters For Stability. Roll-A-Round Engine Stand Allows Easy Engine Installation With Floor Jack For Vw Bug / Vw Beetle 1600CC Air Cooled Engines.
VW Bus/Vanagon
Choose a color
$54.95
Part #: 5005-E
Helping Hand Gland Nut And Axle Nut Assist Tool For Classic Vw Bug / Volkswagen Beetle. Helps Tighten Or Loosen Hi-Torqued Volkswagen Bug Axle Nuts And Gland Nuts By Holding The Brake Drum Or Flywheel Steady. Works With 6 Volt And 12 Volt Flywheels. Works With Vw 4 X 130mm Lug Bolt Pattern And Vw 5 X 205mm Lug Bolt Pattern Brake Drums/Rotors.
VW Bus/Vanagon
Choose a color
$37.95
Part #: 5750
VW Bench Mount Engine Stand, Classic Volkswagen Bug Bus Ghia Type 3 Mounts to work bench. Features swivel head. Use for holding engines or transmissions. 1 5/8" male tube that slides into mount.
VW Bus/Vanagon
Choose a color
$48.95
Part #: 5001
VW CLUTCH ADJUSTING WRENCH Makes Clutch adjustment a cinch.
VW Bus/Vanagon
Choose a color
$7.95
Part #: 5810
VW Crank & Flywheel Jig 8 Pin Positioning Tool mounts to the flywheel or crankshaft and aligns them for drilling 4 additional dowel pin holes. The jig includes hardware to mount to either the crank or the flywheel to ensure a proper pattern is drilled. The jig can be used on all 200mm flywheels and 1300cc and larger Type 1 based cranks.
VW Bus/Vanagon
Choose a color
$32.95
Part #: 5004
VW Valve Guide Installer Tool. The Pilot On This Tool Holds The Valve Guide In The Correct Location While It Is Pressed Into The Cylinder Head.
VW Bus/Vanagon
Choose a color
$10.95
Part #: 5763


Printer friendly


Continue Shopping
Classic Volkswagen Bus/Vanagon parts for the following years: 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989 and 1990