M & T Manufacturing Logo

For: Volkswagen Beetle GAS TANKS, PARTS, SENDING UNITS, ETC.
Description:
A very common problem with old VW’s is a faulty, worn or otherwise deteriorated fuel sending unit.  If your fuel gauge is going haywire (or refuses to move), there are some simple checks and repairs that you can do yourself to get it working again. Use our instructions to help.
Free with the purchase of a Fuel Gauge, Sending Unit or Fuel Gauge Stabilizing Unit. Or, purchase on its own for $2.95. 
Questions? Talk to us!
$2.95

Part #: IN-FUELGAUGE
Protectant sprayed inside of new gas tanks must be cleaned out before tank is used in order to prevent carburetor damage. 1. Isolate gas tank opening with rags and duct tape. 2. Use lacquer thinner (acetone) or carburetor cleaner. 3. Vigorously agitate cleaner by shaking violently. 4. Repeat three or four times, until drained fluid runs clear.
Email questions to: support@mtmfg.com
Call us at: 1-800-999-2892
Copyright © 2019 M&T Manufacturing, 30 Hopkins Lane, South Kingstown, RI 02879
Like us on facebook at http://www.facebook.com/mtmfg.ctg.cug