Fits: VW Beetle 1975-1979; VW Bus 1974-1979; VW Type 3 1968-1974; VW Vanagon 1980-1991
The standard fuel line hosefor all carburetor engines.
VW Beetle 61-74VW Bus 60-71VW Karmann Ghia 61-74VW Thing 73-74
VW Beetle 54-60VW Karmann Ghia 56-60VW Bus 54-59
This fuel pump will work well with any 40hp enginehaving original metal threaded fuel line. This fuelpump is the one to use when you want to preservethe original metal fuel inlet line with the threaded fitting..
VW Beetle 1966-73 and earlier cars with 1600cc engines and generatorVW Bus 1966-71 and earlier cars with 1600cc engines and generatorVW Karmann Ghia 1966-73 and earlier cars with 1600cc engines and generator VW Type 3 62-67
This fuel pump has a slip on fuel inlet so wont work withthreaded fuel lines. You would use a clamp on the pumpinlet over the fuel line.. Most restorers use the 113-127-025CD fuel pumpinstead of this one.Must use 113-127-307 push rod.
VW Beetle 56-74 cars with generatorsVW Karmann Ghia 56-74 cars with generatorsVW Bus 59-71 cars with generatorsVW Type 3 62-73 cars with generatorsVW Thing 73-74 cars with generators This is the most popular fuel pump for cars with generators.tt takes the long push rod (107mm).
VW Beetle and VW Super Beetle 1975-79VW Bus 1975-79VW Vanagon 1980-92
Volkswagen Beetle with 1300-1600cc Base EnginesVolkswagen Karmann Ghia with 1300-1600cc Base EnginesVolkswagen Bus with 1300-1600cc Base EnginesVolkswagen Type 3 with 1300-1600cc Base Engines
VW Bus 72-74
Notes: This fuel pump is compatible with all 12 Volt air-cooled VWs that are equipped with carburetors. It will not work for fuel injected vehicles. The fuel pump kit includes barbed fittings and hose clamps to lock fuel lines in place. Solid state circuitry and a heavy duty case make for a reliable , long lasting fuel pump. Wiring straight forward: Connect + and - wires.
Note: For our electric fuel pumps usedin conjunction with air cooled engine carburetor systems.
VW Beetle and VW Super Beetle 1973-1974VW Karmann Ghia 1973-1974VW Thing 1973-1974
This fuel pump is to be used with a 4-inch (100mm) Pushrod{Part# 113-127-307A) on alternator-equipped cars.If installed with a 4.2-inch (long) Pushrod, the actuating leverin the base of the fuel pump will become damaged rendering fuel pump useless.Fuel pumps with damaged actuating levers are not returnable.Note: This fuel pump can be used on any upright engine whichhas been converted to alternator.
VW Beetle and VW Super Beetle 61-73VW Karmann Ghia 61-73VW Bus 60-71VW Type 3 62-67VW Thing 73-74
VW Beetle and VW Super Beetle 73-79VW Karmann Ghia 73-74VW Bus 1973-79 with 1600ccVW Vanagon 80-91 (with CT and Wasserboxer Engines)
Note: this rebuild kit is not intended forsealed Brazil/China generic fuel pumps.It is intended for the rebuilding of oem fuel pumps.
1300,1500,1600 cc VWs
VW Beetle 50-67VW Bus 68-79VW Vanagon 80-92These fittings are for use with the 9102 fuel pressure regulator.
This is a block-off plate for your fuel pump if you are converting from stock to electric fuel pump system. You can put this unit on the engine and run your electrical fuel pump on the side wall of the engine compartment. This unit has threaded boss in the center if you want to drill it out and use an adapter later. Fits all 1600cc engines.
Choose either the plate with breather hose center inlet or without (shown here: plate with the hose inlet.)
This is the fuel pump plate without the breather hose inlet. As with theversion with the breather hole these plates are rust proof polished aluminum.
VW Beetle and VW Super Beetle 61-74VW Karmann Ghia 61-74VW Bus 60-71VW Type 3 62-67VW Thing 73-74This fuel pump flange is for 40hp and later engines only.It will not work on 25hp, 36hp, or 1700cc-2000cc Type 4 engines.Tighten feul pump carefully to avoic damage to the fuel pump flange.